Introduction
A furnace is a machine that is used to heat a home or building by circulating hot air through ducts. It is important that a furnace be properly maintained in order for it to function correctly. If the furnace has been shut off for an extended period of time, or if it has malfunctioned, it may need to be “jump started” in order for it to begin working again.
In this article, we will discuss the steps needed to jump start a furnace, including checking the power source, replacing the furnace filter, inspecting the thermostat, and resetting the furnace. We will also explain why it may be necessary to call a professional if these steps do not work.
Check the Power Source
The first step in jump starting a furnace is to check the power source. The power source can be either a circuit breaker or a fuse box. To check the circuit breaker, locate the main circuit breaker box and look for a switch labeled “furnace.” Flip the switch to the “on” position. To check the fuse box, locate the main fuse box and look for a fuse labeled “furnace.” Replace any blown fuses or reset any tripped circuit breakers.
Replace the Furnace Filter
The next step in jump starting a furnace is to replace the furnace filter. A clogged or dirty filter can cause the furnace to overheat and shut down. To replace the filter, locate the filter compartment and open it. Remove the old filter and replace it with a new one. Make sure the filter is properly installed according to the manufacturer’s instructions.
Inspect the Thermostat
The third step in jump starting a furnace is to inspect the thermostat. It is important to ensure that the thermostat is set to the “heat” setting and that the temperature is set above the current room temperature. To inspect the thermostat, remove the cover and check the settings. If the settings are correct, try increasing the temperature setting by a few degrees. Replace the cover and turn the thermostat back on.
Reset the Furnace
The fourth step in jump starting a furnace is to reset the furnace. This can be done by locating the reset button on the furnace and pressing it until you hear a click. The reset button is usually located near the motor or blower. If you cannot find the reset button, consult the owner’s manual for instructions.
Call a Professional
If none of the above steps work, it may be time to call a professional. A professional will be able to inspect and repair your furnace in order to get it running again. They will also be able to advise you on proper maintenance and safety precautions.
Conclusion
Jumping starting a furnace can be a tricky task. However, following the steps outlined in this article can help you get your furnace up and running again. Be sure to take all necessary safety precautions when attempting to jump start a furnace, and if all else fails, call a professional.
(Note: Is this article not meeting your expectations? Do you have knowledge or insights to share? Unlock new opportunities and expand your reach by joining our authors team. Click Registration to join us and share your expertise with our readers.)